VINSI Voice for Windows
The desktop app — your softphone in its own window, always signed in, ringing even when the browser is closed.
Created: October 13, 2026
Updated: October 16, 2026
Overview
VINSI Voice is the same softphone described in Softphone, packaged as a Windows application. Dialing, transferring, voicemail, and queues all work the same way — what the app adds is that it stays running on its own, so nothing about your browser can take your phone off the hook.
| In the browser | In the desktop app |
|---|---|
| Rings only while a softphone tab is open | Rings whenever the app is running, including from the tray |
| Closing the tab drops you out of your queues | Closing the window hides it; you stay in your queues |
| Follows whichever organization you last switched to | Stays on its own organization, whatever the browser is doing |
| No alert when you are working in another app | Windows notification for every incoming call |
| You open it each day | Starts with Windows and keeps itself up to date |
Before You Start
- Windows 10 or 11, 64-bit.
- A softphone set up for you — a phone number and extension in the organization you will use the app for. If you don't have one, your administrator adds it under CRM → Admin → Phone Settings → Member Phones; see Admin Setup.
- A headset is strongly recommended; a laptop's built-in microphone will echo.
- No administrator rights needed. The app installs under your own Windows profile, for you alone.
Installing
- Get the installer link from your administrator. It is named
VINSI-Voice-<version>.exe. - Double-click the downloaded file and follow the prompts. It takes a few seconds and asks nothing of you.
- The app opens when the install finishes, and appears in the Start menu as VINSI Voice.
The installer is code-signed by VINSI AI LLC. Windows may still ask you to confirm the install — that is the normal prompt. If you see a SmartScreen warning naming an unknown publisher, the file is not ours: stop and check with your administrator.
Upgrading. Installing a newer version over an older one keeps your settings — you do not need to uninstall first. In practice you will rarely do this by hand; see Automatic Updates.
Installing Silently
For deployment across a fleet, the installer runs without prompts:
VINSI-Voice-<version>.exe /S
It installs under the signed-in user's profile and needs no administrator rights. To remove it the same way, run the uninstaller it leaves behind:
"%LOCALAPPDATA%\VINSI Voice\uninstall.exe" /S
Whether it is installed can be read from the registry key VINSI Voice under HKCU\Software\Microsoft\Windows\CurrentVersion\Uninstall, which also carries the version.
Return codes
| Code | Meaning |
|---|---|
0 | Installed successfully. An upgrade over an existing version also returns this. |
1 | Cancelled — the installer was closed or stopped before it finished. |
2 | Stopped by the installer itself: either a downgrade was attempted over a newer version, or the Microsoft Edge WebView2 runtime could not be found or installed. |
There are no other codes. A failure the installer cannot attribute — no disk space, a blocked write — also reports 2, with the reason on screen when it is not running silently.
Signing In
The first time you open the app it asks you to sign in with your normal VINSI dashboard account. After that it stays signed in across restarts — you will not be asked again unless you sign out.
Once you are in, the app shows your organization at the top and the dialer below it, and connects on its own. You are ready to take calls as soon as the status under the header reads Connected.
The Window
The app has a slim bar of its own in place of the usual Windows title bar. Drag anywhere along that bar to move the window, and drag any edge or corner to resize it.
| Control | What it does |
|---|---|
| ⋮ (kebab) | Opens the menu — About, Documentation, Check for Updates, Sign Out. |
| — | Minimizes to the taskbar. |
| ✕ | Hides to the tray. It does not quit. You stay signed in, stay in your queues, and still ring. |
Closing the window is deliberately not the same as ending your shift. To stop taking calls, use Quit (ends your shift) in the tray menu, or set your queue status to Unavailable or Logged out.
The Menu
| Item | What it does |
|---|---|
| About VINSI Voice | Shows the version number. Quote this to support. |
| Documentation | Opens these docs in your browser. |
| Check for Updates… | Looks for a newer version now, and tells you either way. |
| Sign Out | Signs out and returns to the sign-in screen. Asks first. |
The menu follows whichever theme you have chosen.
The Tray Icon
While the app is running there is a VINSI icon in the Windows notification area, next to the clock. You may need to click the ^ arrow to see it — drag it onto the taskbar once and Windows will keep it visible.
- Left-click the icon to bring the window back.
- Right-click for Show VINSI Voice, Hide to tray, and Quit (ends your shift).
Choosing Your Organization
If you belong to more than one organization, the pill at the top of the app shows which one the phone is in. Click it to switch.
The app keeps its own choice. Switching organizations in the dashboard in your browser does not move your phone — which is the point: looking at another tenant's CRM should not silently stop your own calls from reaching you. Switch inside the app when you want the phone itself to move.
Pick an organization where you have no phone set up and the dialer will have nothing to connect to. Switch back, or ask that organization's administrator for a number and extension.
Calls
Dialing, answering, hold, mute, transfer, conference, missed calls, voicemail, and queue status all behave exactly as they do in the browser, and are documented once on the Softphone page:
- Making Calls — numbers, names, and coworkers by extension.
- Answering Calls.
- Transfer & Conference.
- Missed Calls & Voicemail.
- Call Queue Status.
Incoming Call Notifications
When a call arrives and the window is hidden or behind something else, Windows shows a notification with the caller's name or number. Click it to bring the app forward and answer.
If notifications never appear, open Windows Settings → System → Notifications and make sure VINSI Voice is allowed and Do not disturb is off.
Call Log, Voicemail & Texts
Four icons sit in the softphone header, to the left of the gear. Each opens a panel over the dialer; close it and you are back where you were. Numbers are matched against your CRM contacts and your coworkers, so each row shows the name under the number wherever we know it.
| Icon | Opens |
|---|---|
| Handset with a cross | Missed calls |
| Envelope | Voicemail |
| Speech bubble | Text messages |
| Clock | Call log |
Unread counts appear as small blue badges on the icons. They clear as you read, and the app re-checks every 60 seconds while it is open.
Call Log
Every call on your number — in, out, and missed — newest first, with the direction, the length and the time. Calls to and from anextension show the coworker's name, not just the two or three digits.
Twenty-five load at a time; Load older calls fetches the next twenty-five, and the footer keeps count. Each row has a Call button that closes the panel and puts the number in the dialer.
Voicemail
One card per message, with who it is from, when it arrived and how long it runs. Unread messages carry a dot and sit on a tinted background.
| Control | What it does |
|---|---|
| Play | Plays the recording through your selected speaker and marks it read. |
| Transcript | Shows what was said. Fetched when you ask for it, not before. |
| Call | Closes the panel and puts the caller's number in the dialer. |
| Bin | Deletes the message. |
A transcript reading [silence] is not a fault. Transcription is automatic, and that is what it reports when it heard no speech — a hang-up, dead air, or audio it could not make out. Play the recording to judge for yourself.
Fifty messages load at a time and the panel pages through them fifteen at a time; Load 50 more appears in the footer when your inbox is deeper than that. You can search, and sort by caller, time or length.
Text Messages
Conversations on your number, newest first, each showing the contact or coworker name under the number and a preview of the last message. Open one to read the thread and reply. New messages arrive while the panel is open — there is no need to close and reopen it.
- The compose icon (a sheet with a pencil) starts a message to a number you have never texted.
- With a thread open, Call in the header dials whoever you are texting.
- Load older messages at the top of a long thread fetches the previous hundred without losing your place.
The text icon appears only when your number is set up for messaging. If it is missing, or sending fails with a carrier error, the number needs enabling for SMS — see Text Messages.
Settings
The gear icon in the softphone header. It holds your microphone and speaker, your theme, your ringtone, and click to dial. Changes save as you make them, and switching audio device mid-call takes effect in place — the other side hears nothing.
Theme
| Theme | Looks like |
|---|---|
| Glass (default) | Translucent and frosted, with colour behind it. Blends into the desktop. |
| Dark | The same palette, solid. Easiest to read over a busy desktop. |
| Light | Light surfaces and dark text, for bright rooms. |
The theme applies to the whole window — the top bar, the menu, and the settings dialogs included. It is per computer, so the same person on a bright laptop and a dark desk can have different ones, and the picker appears only in the desktop app: the browser softphone sits inside a page that already has its own styling.
Ringtone
Choose the sound the softphone makes on an incoming call. Everyone starts on Classic; the rest are there so a room full of agents can tell whose phone is ringing. The choices are Classic, Cords, Fairy, Futuristic, Jumping, Marimba, Playful, Toy Telephone, and Vibes.
Unlike the theme, your ringtone is stored on your account, so it follows you to any computer and to the browser softphone. It plays through whichever Speaker you have selected.
Click to Dial
Turn this on and a phone link clicked anywhere on the machine — a web page, Outlook, Teams, a PDF — brings VINSI Voice forward with the number already in the dialer. It does not place the call: you still press Call, so a stray click costs nothing.
It is off until you switch it on, and it is per computer. The switch appears in the desktop app only — a browser tab has no way to register itself with Windows.
Setting it up takes two steps, not one.
- In the app: gear → Click to dial, switch it on. This registers VINSI Voice with Windows as something that can open phone links.
- In Windows: choose it as the default. The panel shows a button — Make VINSI Voice the default — that takes you straight to the right page. Set the link type TEL, which Windows lists as
URL:tel, to VINSI Voice. Do the same for CALLTO if you want it as well.
The second step is not optional, and skipping it looks like a bug. Windows keeps the choice of which app opens a link type under your control on purpose — no application is allowed to take it for itself. If Zoom, Dialpad or Skype for Business is installed, one of them almost certainly holds TEL already, and until you change it the switch will read On while every click still opens the other app. The panel names whichever app currently holds it, so you can see at a glance whether this step is still outstanding.
What it does not do. This works on phone links — text a page has marked up as a phone number. Plenty of sites simply print digits as ordinary text, and those stay unclickable; there is nothing for Windows to hand over. Select the number and paste it into the dialer as before.
Switching it off removes the registration. If another application has taken the link type over in the meantime, the app leaves that alone rather than breaking it.
Automatic Updates
The app checks for a newer version each time it starts. When it finds one it asks before installing, because installing restarts the app and would drop a call in progress. Say yes between calls; say no and it will ask again next time.
To check on demand, use ⋮ → Check for Updates…. Unlike the startup check, this one answers either way — including "you are up to date".
The startup check stays quiet when it finds nothing or cannot reach the server, on purpose: an agent opening their softphone at the start of a shift should not have to dismiss a dialog because the network was not up yet.
Launch at Login
The app adds itself to Windows startup when you install it, so your phone is on before your first call of the day.
To change that, open Windows Settings → Apps → Startup and switch VINSI Voice off. Remember that a phone which is not running does not ring.
Signing Out
⋮ → Sign Out, then confirm. Use it when you hand a shared PC to someone else — it ends the session and returns to the sign-in screen, where the next person signs in as themselves.
On your own machine at the end of a shift you want Quit (ends your shift) from the tray menu instead, which leaves you signed in for tomorrow.
Troubleshooting
| Problem | What to do |
|---|---|
| The app seems to have vanished | It is in the tray by the clock. Click the ^ arrow, then the VINSI icon. |
| "Connection error" after the machine slept or sat over a weekend | It reconnects on its own within a few seconds of the network coming back. If it is still stuck after a minute, close the window and reopen it from the tray. |
| Stuck on Reconnecting… | Check your internet connection, VPN, and firewall. The app keeps retrying with a growing delay — it is not waiting on you. |
| Calls don't ring the app | Check the pill at the top shows the right organization, then ask your admin to confirm you have a number, Inbound is on, and Rings isn't Desk phone only. |
| No Windows notification for incoming calls | Allow VINSI Voice in Windows notification settings and turn off Do not disturb. |
| No microphone, or the caller can't hear you | Allow microphone access when Windows asks, then pick your headset under the gear icon. |
| The dialer is blank | Leave it a moment — the app notices an unresponsive page and reloads it by itself. If it stays blank, quit from the tray and reopen. |
| VINSI Voice is updating, with a spinner | The phone service is being updated. The window comes back on its own within a minute — there is no need to close the app. Try now checks immediately. |
| Phone links open the wrong app | Click to dial is registered but not chosen. Open gear → Click to dial and use Make VINSI Voice the default; see Click to Dial. |
| A voicemail starts playing by itself | Fixed in October 2026. If it still happens, you are on an old version — ⋮ → Check for Updates…. |
| An update never installs | Use ⋮ → Check for Updates… and accept the prompt. If it still fails, ask your administrator for the current installer and run it over the top. |
| Reporting a problem | Open ⋮ → About VINSI Voice and include the version number. |